Error indicators on the winch

RESET light is on

Possible cause: Error when powering the winch.

Solution: Push to reset.

If it remains on after the reset, check if the handheld remote control unit is on.

If it is, check if the Emergency stop button is activated on either unit. If it is, confirm that the emergency has been addressed, and then twist the Emergency stop button to disable the alarm.

Push Reset on the handheld remote control unit or RESET on the control cabinet. Reset indicators should turn off on both units.

If not, turn the winch off and on again.

Up / Down LED is blinking rapidly

Possible cause: Line tangled error.

Solution: Inspect the drum unit for an entangled line. Untangle the line and push Reset.

Up / Down LED is blinking slowly

Possible cause: Non-critical error.

Solution: Turn the winch off and on again.

If you have tried the recommendations above and the RBRglissando still does not function as expected, contact our support team at [email protected] or via the RBR website.