The diagnostic menu

This menu can be accessed via the RBRcervata USB port. This menu is a fully-featured (Restricted) Bash terminal, supporting line editing and tab completion. Type help and press Enter to display a list of the the commands you will need to set up a deployment using the RBRcervata and RBR loggers. Each command can print a short manual by executing them with the -h or the --help argument.

RBRcervello> help

RBRcervello Menu.

These are the available commands to manage RBRcervello

   disable               Disable deployment.
   status                Provide a general overview or detailed information on
                         controller and instruments.
   mount-storage         Mount the data to the host computer.
   unmount-storage       Unmount the data to the host computer.
   diagnose              Diagnostics for MLM and telemetry.
   transparent-link      Establish a transparent link to an instrument
                         serial port.
   config-check          Print the configuration of a specific RBR subsystem.
   edit-config           Edit the configuration of a specific RBR subsystem.
   set-cervello-clock    RBRcervello clock setter.
   cervello-clock        RBRcervello clock checker.
   scrub-controller      Clear all data stored in the SD card.
   scrub-instrument      RBR instrument scrubber.
   enable                Enable deployment according to internal configuration
                         files.
   reboot-controller     Reboot the controller.
   help                  Show this menu.

See Diagnostic menu for more information.