This derived channel implements a simplified equation for water depth in meters, in which no account is taken of either geographical variations in the Earth's gravitational field, or the variation of water density with depth: both these quantities are treated as constants, although the water density can be changed using the "settings density" command.
$Dm = \dfrac{P - Patm}{p \cdot g}$In the form used by the logger, using an RBRconcerto³ C.T.D as an example, this becomes:
where
- n0 is the index of the pressure channel, 3 in this case,
- n1 is the index of the atmospheric pressure channel; not present in this example, so set to "value".
- p is the value set for the density of water using the "settings density" command,g is a fixed constant 0.980665, representing the standard value of acceleration due to gravity, in units which correctly account for pressures being measured in decibars,
- Dm is the calculated depth in meters.
Confirm the channel type. Request confirmation of all calibration coefficients. Request, then change, the programmed water density.Examples
<< calibration 4 type = dpth01
<< calibration 4 type = dpth01, datetime = 20171201000000, n0 = 3, n1 = value
<< settings density = 1.026021
>> settings density = 1.0197
<< settings density = 1.0197