pauseresume

Usage

>> pauseresume

Security

Open

Description

This command is available in firmware versions 1.116 or later. It allows the host to determine if the pause/resume feature is available on the instrument. It allows an elevated host to allow and deny the feature for the instrument.

If successful, the command reports its state:

state, will be one of the values: "n/a", "paused", or "running".

Error conditions that would prevent the successful execution of the command are:

An older version of firmware that does not support the command is on the instrument.
The permission for the feature has not been allowed

Examples

>> pauseresume
<< E0109 feature not available

The feature is not allowed on this instrument.

>> pauseresume
<< E0102 invalid command 'pauseresume'

The instrument firmware is older and does not recognize this feature.

>> pauseresume
<< pauseresume state = n/a

Either the deployment has not been enabled or the sampling mode is 'regimes'

>> pauseresume
<< pauseresume state = running

The deployment has been enabled and is not paused.

>> pauseresume
<< pauseresume state = paused

The deployment has been enabled and is paused.

Errors

E0102 invalid command
The logger does not support the sampling pause and resume feature.

E0109 feature not available
The feature has not been allowed.