Skip to main content

The diagnostic menu

This menu can be accessed via the RBRcervata USB port. This menu is a fully-featured (Restricted) Bash terminal, supporting line editing and tab completion. Type help and press Enter to display a list of the the commands you will need to set up a deployment using the RBRcervata and RBR loggers. Each command can print a short manual by executing them with the -h or the --help argument.

CODE
RBRcervello> help

RBRcervello Menu.

These are the available commands to manage RBRcervello

   disable               Disable deployment.
   status                Provide a general overview or detailed information on
                         controller and instruments.
   mount-storage         Mount the data to the host computer.
   unmount-storage       Unmount the data to the host computer.
   diagnose              Diagnostics for MLM and telemetry.
   transparent-link      Establish a transparent link to an instrument 
                         serial port.
   config-check          Print the configuration of a specific RBR subsystem.
   edit-config           Edit the configuration of a specific RBR subsystem.
   set-cervello-clock    RBRcervello clock setter.
   cervello-clock        RBRcervello clock checker.
   scrub-controller      Clear all data stored in the SD card.
   scrub-instrument      RBR instrument scrubber.
   enable                Enable deployment according to internal configuration
                         files.
   reboot-controller     Reboot the controller.
   help                  Show this menu.

See Diagnostic menu for more information.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.