Example 4: corr_cond - conductivity corrections
Combined CT cell formula revision
In September 2018, RBR Ltd. introduced a new equation for the combined CT cell. Instruments with a combined CT cell manufactured before the 1st September 2018 are using the equation described here. The difference between the two corrections is a move from a first- to third-order polynomial for pressure dependence.
Continuing with the RBRconcerto³ C.T.D.pH logger, the conductivity reading from Channel-1 without corrections is given by a simple linear function:
where R is the normalized voltage ratio from Channel-1 monitoring conductivity, c0,c1 are the core coefficients of the linear equation, and Craw is the uncorrected conductivity output, reported in mS/cm for RBR marine instruments.
The equation which corrects the output for the effects of both temperature and pressure on the conductivity cell is:
Casting the equation into the style used by the logger would give:
where
Craw is the uncorrected conductivity, c0 + c1 × R,
x0, x1, x2 correspond directly to the constants "Kc1", "Kc2" and "Kc3",
x3 is the calibration temperature "Tcal" in °C,
x4 is the calibration pressure "Pcal" in dbar,
n0 is the index of the internal temperature of the conductivity cell channel, in this example 8,
value(n0) is the final output value of the internal temperature of the conductivity cell channel in °C,n1 is the index of the pressure channel, in this example 3,
value(n1) is the final output value of the pressure channel in dbar,Ccorr is the corrected output in mS/cm.
It is quite common to have a logger monitoring conductivity and temperature without a pressure channel, typically deployed at a known, constant depth. In this case, n1 would be set to "value", and so value(n1) would be substituted by a default value (see the "settings pressure" command).
Examples
>> channel 1 type
<< channel 1 type = cond09Confirm the channel type.
>> calibration 1 datetime = 20171201000000, c0 = 0.2346, c1 = 153.4873Set the core coefficients.
>> calibration 1 datetime = 20171201000000, x0 = 0.2003, x1 = 0.2943, x2 = 0.085, x3 = 15.028, x4 = 10.0025Set the cross-channel correction coefficients.
>> calibration 1
<< calibration 1 label = conductivity_00, datetime = 20171201000000, c0 = 0.2346, c1 = 153.4873, x0 = 0.2003, x1 = 0.2943, x2 = 0.085, x3 = 15.028, x4 = 10.0025, n0 = 8, n1 = 3Request confirmation of all calibration coefficients.