power

Usage

>> power [ source | int | ext | reg ] 

Security

Description

Reports parameters relating to the logger's power sources as follows: 

• source is one of the following names:
  1. usb  the logger is drawing power from the USB connection.
  2. int  the logger is drawing power from its internal battery.
  3. ext  the logger is drawing power from an external power source.
     
     
• int reports the measured voltage of a standard logger's internal battery; for a short logger, reports n/a.
  
• ext reports the measured voltage of any external power source attached.
• reg reports the measured voltage of a short logger's internal voltage regulator; for a standard logger, reports n/a.

Support for short instruments starts with firmware version 1.080; earlier firmware versions do not report the reg parameter. A short instrument is one which takes only four AA cells instead of the standard eight. In a short instrument, a direct measurement of the internal battery can not be made, and the output of an internal voltage regulator is reported instead. Standard instruments do not have an equivalent regulator, but can monitor the battery voltage directly.

Examples